Inject Gas - Ametek AMEVision User Manual

Inject Gas

Press the Left or Right arrows to locate the Inject Gas menu and press ENTER/
MENU. Use this menu to test the flow of gas to the analyzer.
1. Use the arrows to select the gas to inject and press ENTER/MENU. An "X"
2. Select the START button and press ENTER/MENU to inject the gas.
Figure 3-4.
Inject Zero Gas screen
(Diagnostics Mode).
3. Press ENTER/MENU to end the test and return to the Inject Gas screen. It
4. Press CANCEL to exit from the menu.
3-6 | Thermox ® AMEVision Display User Interface
appears in the check box of the option selected.
Pressing ENTER/MENU to start the test will turn on the
Diagnostics Mode.
will also turn Diagnostics Mode Off.
PN 9000-165-VE, Rev P