System Passcode - Ametek AMEVision User Manual

System Passcode

By default, the system passcode is disabled. This menu allows you to create a
new passcode or to disable the passcode requirement.
1. From the Main Menu screen, press ENTER/MENU to access the Configu-
2. Press the Left or Right arrows to locate the Passcode Configuration
Figure 2-3.
Password Configuration
screen.
3. Enter a 5-digit passcode using the numeric keys on the keypad. Press
4. Navigate to the ACCEPT button and the press ENTER/MENU.
PN 9000-165-VE, Rev P
If you create and enter a passcode, you will be required to enter that
passcode on a lock screen every time you exit the HOME screen and
before accessing any of the menu options.
ration Menu.
Screen.
ENTER/MENU and enter the passcode again to confirm.
To clear an existing passcode or if you do not want to set a passcode,
enter "00000" in the Passcode field.
|
Controller/Interface 2-5