Sensor Configuration; Select Sensor Options - Ametek AMEVision User Manual

Sensor Configuration

Select Sensor Options

Figure 2-7.1.
Select Sensor Options screen.
1. From the Main Menu screen, press ENTER/MENU to access the Configu-
2. Press the Left or Right arrows to locate the Sensor Configuration menu
3. Options for the various sensor combinations are listed. Select the options
Figure 2-7.2.
Select Sensor Options screen.
Flow Sensor selection.
PN 9000-165-VE, Rev P
ration Menu.
and press ENTER/MENU.
you are using: Combustibles or Methane or both.
If you have a flow sensor on your analyzer, make sure that Flow is
selected on this screen.
Auto Calibration is not a standard feature of the WDG-V Analyzer. Do
not select Auto Calibration unless your analyzer is equipped with a
Remote Calibration Unit (RCU).
|
Controller/Interface 2-9