The AMEVision Display User Interface provides the capability to easily config-
ure, calibrate, and monitor up to four (4) WDG-V Analyzers. A two-wire Modbus
RTU interface connects the AMEVision to each WDG-V Analyzer. The AMEVision
provides the following communication interfaces: Modbus RTU, web interface
(TCP/IP), and USB flash drive capabilities for uploading/downloading data and
firmware upgrades.
AMEVision Software Display and Keypad
•
•
•
•
•
PN 9000-165-VE, Rev P
Controller/Interface
4.2" color, 1/4 VGA display
19-key keypad
Web interface (TCP/IP) and MODBUS (RTU)
Trend Data Logging/Charting screen
USB port inside for firmware downloads and data uploads
AMEVision Display Screen
The menu display is a two dimensional
graphical user interface accessed using
the Navigation Arrows and ENTER/MENU.
These keys allow you to navigate through
the icons and to select the menu option
needed.
AMEVision Keypad
The AMEVision is operated by pressing the
arrows and buttons on the keypad. ENTER/
MENU selects the option on the screen
and CANCEL exits the option. The numeric
keypad is used to enter information in the
fields. Navigation arrows are used to move
throughout the display.
Controller/Interface
|
2-1