Start-up
11.2 Procedure settings
This chapter as well as the following chapters describe the required settings, how the settings are implemented and
which messages may appear on the display.
Furthermore, you will find advice and recommended actions regarding the settings to be chosen.
Subsequent to switching-on the power supply of the evaluation unit, the operating system requires approx. 30 seconds
to start the system. The following start screen will appear:
Subsequently, the device will switch over to the main menu. You can now make all required settings. For this purpose,
please follow the procedure on the next pages.
Using the password
®
To get access to several selection and setting levels of the METPOINT
OCV, it is necessary to enter a password.
METPOINT
®
OCV
37