Chapter 3 Configuring The 1762Sc-If4Of4 Using Rslogix 500; Section 3.1 Things You Should Know; Section 3.2 Module Memory Map - Spectrum Controls 1762sc-IF4OF4 User Manual

Section 3.1
Things You
Should Know
Section 3.2
Module Memory
Map
User's Manual Pub. 0300247-01 Rev. D
Chapter 3
Configuring the 1762sc-IF4OF4
Using RSLogix 500
This chapter covers the following subjects:

Things you should know

Module memory map

Add module to Logix 500

Module configuration

Reading input data

Module update time
This chapter describes how to configure the IF4OF4 module for the MicroLogix
1100, 1200, and 1400 system using RSLogix 500 programming software.
The module uses 8 input words and 8 output words for input data and
configuration. The following figure describes the data mapping for the module.
Figure 3-1 (Module Memory Map)
Input Image
I:0 to I:7 (8 words)
(Input Data)
Output Image
O:0 to O:7 (8 words)
(Configuration Data)
Read
1762sc-IF4OF4
Write