Filling The Tank; Spraying - Stihl SG 10 Instruction Manual

Filling the Tank

: Stand the tank on a level surface.
: Fill up with thoroughly mixed spray
solution – do not exceed maximum
capacity of 0.42 gal. (1.6 L) (arrow).
: Fit the cover and tighten it down
firmly.
SG 10

Spraying

Before Spraying
: Select the nozzle to suit the required
spray rate.
Spray rate:
Nozzle (black) 9 cu.in/min
150 cm
Nozzle 15 cu.in/min
(orange / black) 250 cm
: Fit the nozzle on the spray head.
1
: Move the pump shaft (1) up and
down uniformly – 20 to 30 strokes
are required to build up pressure.
2
3
/min
3
/min
: Rotate the nozzle (2) to adjust the
spray pattern (fine jet or spray mist).
Check operation of pressure relief valve
before spraying.
: Grip the pin (3) on the pressure
relief valve and pull it upwards for a
moment. Air must escape from the
valve.
English / USA
3
9