KBR multisys 1D3-ESDP Operating Instructions, Technical Parameters page 38

MULTIGATE-Profibus / multisys 1D3-ESDP
Module name
error status
Page - 32 -
Config Description
0x41,0x83, 45 Error flags, defined as follows:
0x0001 Operating cycles of a stage
0x0002 Phase relation deviation
0x0004 Current direction wrong
0x0008 Facility too small
0x0010 Battery level critical
0x0020 Parameter error
0x0040 Input overloaded
0x0080 More detailed error messages
0x0100 Network failure
0x0200 Limit value violated
0x0400 Not assigned
0x0800 Not assigned
0x1000 Reset performed
0x2000 Not assigned
0x4000 Error message
0x0800 Not assigned
Table 17: Input data multicomp 96 LCD bus (cont.)
exceeded
available
Unit Format
unsigned
long
Version 1.0