HEIDENHAIN SRP 5000 Operating Instructions Manual page 33

9 What to do if ...
9.1 General faults
If faults or malfunctions that are not listed in the
"Troubleshooting" table below occur during operation, a
HEIDENHAIN service agency must be contacted.
WARNING
Danger of contusion from insufficient safety
clearances!
If the safety distances form the surrounding contours
are too small, it produces a risk of squeezing people's
limbs.
The machine manufacturer (OEM) must ensure a
safe environment and adequate safety clearances
HEIDENHAIN | Betriebsanleitung SRP 5000 | 5/2017
35