HEIDENHAIN SRP 5000 Operating Instructions Manual page 22

1.5 Target group for the instructions
The Operating Instructions must be read and observed by
every person who performs any of the following tasks:
Transport and storage
Mounting
Installation
Commissioning
Operation
Cleaning and maintenance
Troubleshooting
Removal and disposal
1.6 Notes in this documentation
Safety precautions
Comply with all safety precautions indicated in these
Operating Instructions and in your machine tool builder's
documentation!
Precautionary statements warn of hazards in handling the
product and provide information on their prevention. They
are classified according to the severity of the danger, and
are divided into the following groups:
DANGER
Danger indicates hazards for persons. If you do not
follow the avoidance instructions, the hazard will
in death or severe injury.
WARNING
Warning indicates hazards for persons. If you do not
follow the avoidance instructions, the hazard
result in death or serious injury.
CAUTION
Caution indicates hazards for persons. If you do not
follow the avoidance instructions, the hazard
result in minor or moderate injury.
NOTICE
Notice indicates danger to material or data. If you
do not follow the avoidance instructions, the hazard
could result in things other than personal injury,
like property damage.
24
Informational notes
Observe the informational notes provided in these
instructions to ensure reliable and efficient operation of
the product.
In these instructions, you will find the following
informational notes:
1.7 Symbols and fonts used for marking
text
result
In these instructions the following symbols and fonts are
used for marking text:
Format
...
...
could
...
...
could
The information symbol indicates a tip.
A tip provides important additional or
supplementary information.
The gear symbol indicates that the function
described depends on the machine,
Your machine must feature a certain
software or hardware option
The behavior of the functions depends on
the configurable machine settings
The book symbol represents a
reference to external documentation, e.g. the
documentation of your machine tool builder or
other supplier.
Meaning
Identifies an action and the result of this
action
Identifies an item of a list
HEIDENHAIN | Betriebsanleitung SRP 5000 | 5/2017
e.g.
cross