HEIDENHAIN SRP 5000 Operating Instructions Manual page 27

3 Transport and storage
3.1 Unpacking
Open the top lid of the box
Remove the packaging materials
Unpack the contents
Check the delivery for completeness
Check the delivery for damage
3.2 Items supplied and accessories
The following items are included in the shipment:
Device
Operating Instructions
Calibration charts
Addendum (optional)
Further information: "Notes on reading the docu-
mentation", page 23
Accessories
The following accessories are optionally available and can
be ordered from HEIDENHAIN:
Optional accessories
Motor connection cable
AccurET Modular 48
AccurET 48
AccurET VHP 48
Adapter cable for encoder with
1 V (SRP 5080)
PP
for direct connection to ETEL AccurET
position controllers
Adapter cable for encoder with
EnDat 2.2 (SRP 5010)
for direct connection to ETEL AccurET
position controllers
Further information on the AccurET position
controllers is available on the Internet at
www.etel.ch or from HEIDENHAIN upon
request.
HEIDENHAIN | Betriebsanleitung SRP 5000 | 5/2017
3.3
Have the shipping agent confirm the damage
Keep the packaging materials for inspection
Notify the sender of the damage
Contact the distributor or machine manufacturer for
replacement parts
3.4
Repackaging
Repackaging should correspond to the original packaging
as closely as possible.
Protect the device connections with dust protection
caps
Repackage the product such that it is protected from
ID number
impact and vibration during transit
Repackage the product such that it is protected from
1140842-xx
the ingress of dust or humidity
830781-01
Include all documents.
829943-01
Storage of the product
822888-01
Package the product as described above
1159446-xx
Observe the specified ambient conditions
Further information:
page 38
Inspect the product for damage after any transport or
longer storage times
1165032-xx
In case of damage in transit
If damage occurred during transit:
Keep the packaging materials for
inspection
Contact HEIDENHAIN or the machine
manufacturer
This applies also if damage occurred to
requested replacement parts during transit.
Repackaging and storage
"Encoder characteristics",
29