Appendix D - Front Panel Hot-Key Functions - Bacharach Neutronics Mini-ICS Operation Manual

APPENDIX D – Front Panel Hot-Key Functions
5.4
For convenience in operating and troubleshooting, the Model Mini-ICS has four Front Panel Hot-
Key Functions that can be performed quickly via the front panel without entering the normal Front
Panel, or Service Port user menus.
To access the "Return to RUN mode", press simultaneously and release the keys indicated in
figure 14. To return to normal operation, press and release the same keys again.
To access the remaining available functions described in figure 14, press simultaneously and hold
the keys indicated until the 7-segment alphanumeric display shows "---" then release the pressed
keys. To return to normal operation, press and release the same keys again.
KEYS PRESSED
UP + DOWN
UP + DOWN
DOWN + MODE
UP + DOWN + MODE
Figure 14 – Hot Key functions
Manual Part Number:
5-06-4900-53-0
Appendix C – Factory Configuration Settings
DESCRIPTION OF FUNCTION
Return to "RUN" mode immediately (aborts any
mode except Auto Calibration)
Run Lamp Test
Show Sensor Voltage
Re-start Model Mini-ICS
Revision Level: C
ECO 044952
Revision Date:
May 08, 2018
Page
5-6