Appendix E - Warranty; Intended Use For The Model Mini-Ics; Appendix F - Reference Drawings - Bacharach Neutronics Mini-ICS Operation Manual

APPENDIX E – Warranty
5.5
Neutronics warrants to the original purchaser, that the Model Mini-ICS Oxygen analyzer is free
from defects in material and workmanship for a period of one (1) year from the date of shipment
from Neutronics or from one of Neutronics' authorized dealers. Our liability will be limited to the
repair or replacement, at our factory, of parts found to be defective within the warranty period, as
determined by Neutronics. The parts will be repaired or replaced free of charge if shipped prepaid
to the factory in the original shipping carton. This warranty is void if the product has been subject to
misuse or abuse, including but not limited to: exposure to water, humidity, temperature, shock or
pressure outside of the listed specifications, or has not been operated or installed in accordance
with operating and maintenance instructions, for repairs which were not performed by Neutronics
or by one of its authorized dealers, or if the identifying markings on the product label have been
altered or removed.
The seller assumes no liability for consequential damages of any kind, and the buyer, by
acceptance through purchase of this product, will assume all liability for the consequences of its
use or misuse by the buyer, his employees, or others.
Neutronics reserves the right to use any materials in the manufacture, repair or service of the
products and to modify the design as deemed suitable, in so far as these materials or modifications
maintain the stated warranty.
It is the sole responsibility of the buyer / user to determine if this product is suitable for the intended
application.
THESE WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED, OR IMPLIED INCLUDING WARRANTY OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE.

Intended Use for the Model Mini-ICS

The model Mini-ICS Oxygen analyzer was designed to provide the trained operator with useful
information relating to the concentration of Oxygen. This information may be used in process
control or to minimize possible hazardous conditions, which may be present in various processes.
Before implementation, the user must fully understand the operation and limitations of this
instrument as well as the application for its use. The responsibility for the proper application,
operation, installation, and maintenance of the model Mini-ICS Oxygen analyzer is the sole
obligation of the trained operator. The purchaser is required to ensure operators are properly
trained in the use of this unit as well as in the possible hazards associated with its use or with the
intended application. The purchaser must ensure that all of the proper warnings, labels, instruction
manuals, lock outs, redundant components, hazard analysis, and system validation have been
completed and provided to the trained operator before implementation of the model Mini-ICS
instrument.
APPENDIX F – Reference Drawings
5.6
Refer to the attached drawings for supplemental equipment details and installation information.
Manual Part Number:
5-06-4900-53-0
Revision Level: C
ECO 044952
Appendix E – Warranty
Revision Date:
May 08, 2018
Page
5-7