ILX Lightwave LDC-3916338 User Manual page 79

n Front Panel
n Remote
The LASer:SET: command path is used to get to the selected channel's laser set point queries.
The following commands may be reached directly from the LASer:SET: command path.
LASer:SET:LDI?
LASer:SET:MDI?
LASer:SET:MDP?
n Front Panel
n Remote
The LASer:SET:LDI? query returns the constant current setpoint which is used for both bandwidth modes.
SYNTAX DIAGRAM
PARAMETERS None. The response is an <nrf value> which represents the selected channel's constant I set
point value, in mA.
POINTS OF
INTEREST The LDI set point is only in effect when the LAS operating mode is IHBW or ILBW.
EXAMPLES "LAS:SET:LDI?" -response: 50.0, means the selected channel's laser output current set point
value is 50.0 mA.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
PAGE 34
LASer:SET:LDI?
:
LDI
SET
LASer:SET:
?
CHPT 4