ILX Lightwave LDC-3916338 User Manual page 61

¨ Front Panel
n Remote
The LASer:ENABle:EVEnt? query returns the value of the selected channel's Laser Event Status Enable
register.
SYNTAX DIAGRAM
PARAMETERS None. The response is the sum of the following:
1 - Laser Current Limit Changed State
2 - Laser Voltage Limit Changed State
4 - N/A
8 - Power Limit Changed State
16 - Interlock Changed State
32 - N/A
64 - N/A
128 - Open Circuit Changed State
POINTS OF
INTEREST The enabled Laser events for the selected channel can be set by using the
LASer:ENABle:EVEnt command. The selected channel's Laser event status can be monitored
by the LASer:EVEnt? query.
EXAMPLES "LAS:ENAB:EVE?" -response: 1040, means that the Output On Changed State and Interlock
Changed State Laser events for the selected channel will be reported (in summarized form) to
the status byte.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
PAGE 16
LASer:ENABle:EVEnt?
:
EVE
ENAB
256 - Output is Off Changed State
512 - Output Changed Tolerance State
1024 - Output Is On Changed State
2048 - N/A
4096 - N/A
8192 - N/A
16384 - N/A
32768 - N/A
?
CHPT 4