Table of Contents
Advertisement
n Front Panel
n Remote
The LASer:LIMit: command path is used to get to the selected channel's laser limit commands.
The following commands may be reached directly from the LASer:LIMit: command path.
LASer:LIMit:I
LASer:LIMit:I?
n Front Panel
n Remote
The LASer:LIMit:I command sets the selected channel's Laser current limit value.
SYNTAX DIAGRAM
:
LAS
PARAMETERS
An <nrf value> which represents the selected channel's Laser limit current, in mA.
POINTS OF
INTEREST
The current limit is in effect in all modes of operation of the selected channel's laser output.
EXAMPLES
"LAS:LIM:I 80" -action: the selected channel's Laser current limit is set to 80 mA.
":Laser:Limit:I 160" -action: the selected channel's Laser current limit is set to 160 mA.
n Front Panel
n Remote
The LASer:LIMit:I? query returns the value of the selected channel's Laser current limit.
SYNTAX DIAGRAM
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
LASer:LIMit:MDP
LASer:LIMit:MDP?
:
LIM
:
:
LAS
PAGE 23
LASer:LIMit:
LASer:LIMit:V
LASer:LIMit:V?
LASer:LIMit:I
<white
:
I
space>
LASer:LIMit:I?
:
I
LIM
<nrf
value>
?
CHPT 4
Advertisement
Chapters
Table of Contents
