ILX Lightwave LDC-3916338 User Manual page 47

NAME
LAS:LDV?
LAS:LIM:I
LAS:LIM:I?
LAS:LIM:MDP
LAS:LIM:MDP?
LAS:LIM:V
LAS:LIM:V?
LAS:MDI
LAS:MDI?
LAS:MDP
LAS:MDP?
LAS:MODE?
LAS:MODE:IHBW
LAS:MODE:ILBW
LAS:MODE:MDI
LAS:MODE:MDP
LAS:MOD
LAS:MOD?
LAS:OUT
LAS:OUT?
LAS:SET:LDI?
LAS:SET:MDI?
LAS:SET:MDP?
LAS:STEP
LAS:STEP?
LAS:SYNCLDI?
LAS:SYNCLDV?
LAS:SYNCMDI?
LAS:SYNCMDP?
LAS:TOL
LAS:TOL?
MODERR?
MODIDN?
MODPUD
MODPUD?
STATMENU:LINE2?
STATMENU:LINE2:VF
STATMENU:LINE2:IPD
STATMENU:LINE2:PPD
Table 4.1
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
LDC-3916338 Device-Dependent Commands
PARAMETERS FUNCTION
NONE Returns the measured laser voltage value.
1 Sets the LASER current source limit.
NONE Returns the LASER current source limit.
1 Sets the constant optical power (from monitor PD) limit value.
NONE Returns the optical power (from monitor PD) limit value.
1 Sets the current source's adjustable compliance voltage.
NONE Returns the value of the adjustable compliance voltage setting.
1 Sets the monitor current set point.
NONE Returns the monitor PD current measured value.
1 Sets the constant optical power set point
NONE Returns the actual monitor PD power value
NONE Returns the mode, I (current), IHBW (high bandwidth), P
(optical power) or MDI (constant monitor current).
NONE Sets the mode to constant current, high bandwidth.
NONE Sets the mode to constant current low bandwidth mode.
NONE Sets the mode to constant monitor current mode (regardless of
CALPD value).
NONE Sets the mode to constant optical power mode.
1 Enables or disables the channel's modulation input.
NONE Returns the status of the channel's modulation input.
1 Enables/disables the current source output.
NONE Returns the current source output status.
NONE Returns the laser constant I (current) set point.
NONE Returns the laser constant optical power set point.
NONE Returns the constant P (optical power) set point.
1 Sets the laser set point step value.
NONE Returns the laser set point step value.
NONE Returns the value of the measured laser current.
NONE Returns the value of the measured laser voltage.
NONE Returns the value of the measured montor photodiode current.
NONE Returns the value of the measured optical power.
2 Sets the laser set point tolerance value and time period value.
NONE Returns the laser setpoint tolerance value and time period value.
NONE Returns the error codes (up to 10) from the module.
NONE Returns identification data from the module.
1 Used at factory to set calibration information.
NONE Returns factory set calibration information.
NONE Returns the name of the measurement that is displayed on line 2
of the status menu.
NONE Sets line 2 of the status menu to display laser forward voltage.
NONE Sets line 2 of the status menu to display photodiode current.
NONE Sets line 2 of the status menu to display optical power.
LDC-3916338 Device-Dependent Commands (Cont.)
PAGE 2
CHPT 4