ILX Lightwave LDC-3916338 User Manual page 58

¨ Front Panel
n Remote
The LASer:ENABle: command path is used to get to the selected channel's laser status enable commands and
queries.
The following commands may be reached directly from the LASer:ENABle: command path.
LASer:ENABle:COND
LASer:ENABle:COND?
LASer:ENABle:EVEnt
¨ Front Panel
n Remote
The LASer:ENABle:COND command sets the selected channel's Laser Condition Status Enable register. The
bits in this register determine which bits in the Condition Status register are summarized in the 3916 or 3908
status byte.
SYNTAX DIAGRAM
:
LAS
PARAMETERS An <nrf value> whose sum represents the enabled bits:
1 - Laser Current Limit
2 - Laser Voltage Limit
4 - N/A
8 - Power Limit
16 - Interlock Disabled
32 - N/A
64 - N/A
128 - Open Circuit
POINTS OF
INTEREST This register can be read using the LASer:ENABle:COND? query.
EXAMPLES "LAS:ENAB:COND 129" -action: only the Open Circuit and Current Limit conditions will be
summarized in the status byte.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
LASer:ENABle:EVEnt?
LASer:ENABle:OUTOFF
LASer:ENABle:OUTOFF?
:
:
ENAB
256 - Output is Off
512 - Output In Tolerance
1024 - Output is On
2048 - N/A
4096 - N/A
8192 - N/A
16384 - N/A
32768 - N/A
PAGE 13
LASer:ENABle:
LASer:ENABle:COND
<white <nrf
COND
value>
space>
CHPT 4