Table of Contents
Advertisement
POINTS OF
INTEREST
The LAS:LIM:MDP is in effect for all LAS operating modes.
EXAMPLES
"LAS:LIM:MDP?" -response: 3.0, means the selected channel's monitor PD power limit is set
to 3.0 mW.
":LAS:Limit:MDP?" -response: 10.0, means the selected channel's monitor PD power limit is set
to 10.0 mW.
n Front Panel
n Remote
The LASer:MDI command sets the value of the photodiode feedback current set point, in µA.
SYNTAX DIAGRAM
:
An <nrf value> which represents the selected channel's photodiode feedback current, in µA.
PARAMETERS
POINTS OF
INTEREST
On the front panel, monitor diode current is referred to as IPD.
EXAMPLES
"Las:Mdi 40" -action: The selected channel's Laser output is controlled so that the photodiode
feedback current remains constant at 40 µA.
"Laser:MDI 200" -action: The selected channel's Laser output i s controlled so that the
photodiode feedback current remains constant at 200 µA.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
LAS
MDI
PAGE 26
LASer:MDI
<white
<nrf
space>
value>
CHPT 4
Advertisement
Chapters
Table of Contents
