ILX Lightwave LDC-3916338 User Manual page 59

¨ Front Panel
n Remote
The LASer:ENABle:COND? query returns the value of the selected channel's Laser Condition Status Enable
register.
SYNTAX DIAGRAM
PARAMETERS None. The response is the sum of the following:
1 - Laser Current Limit
2 - Laser Voltage Limit
4 - N/A
8 - Power Limit
16 - Interlock Disabled
32 - N/A
64 - N/A
128 - Open Circuit
POINTS OF
INTEREST The selected channel's enabled Laser conditions can be set by using the LASer:ENABle:COND
command.
The Laser condition status can be monitored by the LASer:COND? query.
EXAMPLES "LAS:ENAB:COND?" -response: 17, means that the Current Limit and Interlock Disabled Laser
conditions will be summarized in the status byte.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
PAGE 14
LASer:ENABle:COND?
:
COND
ENAB
256 - Output is Off
512 - Output In Tolerance
1024 - Output Is On
2048 - N/A
4096 - N/A
8192 - N/A
16384 - N/A
32768 - N/A
?
CHPT 4