n Front Panel
n Remote
The LASer:MODulation? query returns the status of the selected laser channel's modulation switch.
SYNTAX DIAGRAM
PARAMETERS
None. The response is an <nrf value>, 1 = ON, 0 = OFF.
POINTS OF
INTEREST
More than one channel at a time may be modulated via the modulation signal, if desired.
EXAMPLES
"Las:MODULATION?" -response: 0, means that the selected channel's modulation switch is
disabled.
"LAS:MOD?" -response: 1, means that the selected channel's modulation switch is enabled. A
modulating signal applied to the back panel connector will be present at the selected channel.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
PAGE 32
LASer:MODulation?
?
MOD
CHPT 4