ILX Lightwave LDC-3916338 User Manual page 54

POINTS OF
INTEREST After this command is issued, the LDC-3916338 Laser Diode Current Source will allow
calibration of the laser voltage measurement. This procedure is outlined in the Calibration
section of the Laser module instruction manual.
The "LAS:CAL:STAT?" query may be used to determine when the unit is ready for a
calibration value to be entered.
EXAMPLES "Las:CAL:Ldv" -action: the LDC-3916338 Laser Diode Current Source enters calibration mode
for Laser voltage.
"Las:Cal:LDV" -action: the LDC-3916338 Laser Diode Current Source enters calibration mode
for Laser voltage.
n Front Panel
n Remote
The LASer:CAL:MDI command is used to enter the Laser photodiode current calibration mode for the selected
channel.
SYNTAX DIAGRAM
PARAMETERS None.
POINTS OF
INTEREST After this command is issued, the LDC-3916338 Laser Diode Current Source will automatically
enter the Laser photodiode current calibration mode for the selected channel. When the LDC-
3916338 Laser Diode Current Source is ready, the user should enter true measured values. This
procedure is outlined in the Calibration section of the Laser module instruction manual.
In remote operation, the LAS:CAL:STAT? query may be used to determine if the LDC-3916338
Laser Diode Current Source is ready for the user to enter a value via the LAS:CAL:MEAS
command.
EXAMPLES "Las:CAL:MDI"
photodiode current calibration mode.
"Chan 1;LAS:Cal:MDI" -action: the LDC-3916338 Laser Diode Current Source enters the Laser
photodiode current calibration mode for channel 1.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
-action: the LDC-3916338 Laser Diode Current Source enters the Laser
PAGE 9
LASer:CAL:MDI
:
CAL
MDI
CHPT 4