ILX Lightwave LDC-3916338 User Manual page 64

¨ Front Panel
n Remote
The LASer:EVEnt? query returns the value of the selected channel's Event Status Register.
SYNTAX DIAGRAM
PARAMETERS None. The response is the sum of the following:
1 - Laser Current Limit Changed State
2 - Laser Voltage Limit Changed State
4 - N/A
8 - Power Limit Changed State
16 - Interlock Changed State
32 - N/A
64 - N/A
128 - Open Circuit Changed State
POINTS OF
INTEREST The events that are reported in the status byte can be set by using the LASer:ENABle:EVEnt
command.
The event status is only cleared when the event status is read or by the *CLS command. The
condition status, however, is constantly changing.
EXAMPLES "LAS:EVE?" -response: 9, the Power Limit and Current Limit conditions have changed state
since the event register was last read.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
PAGE 19
LASer:EVEnt?
EVE
?
256 - Output Is Off Changed State
512 - Output Changed Tolerance State
1024 - Output Is On Changed State
2048 - N/A
4096 - N/A
8192 - N/A
16384 - N/A
32768 - N/A
CHPT 4