ILX Lightwave LDC-3916338 User Manual page 75

n Front Panel
n Remote
The LASer:MODE:ILBW command selects laser constant current mode.
SYNTAX DIAGRAM
PARAMETERS None.
POINTS OF
INTEREST Constant ILBW mode (low bandwidth) enables the selected channel's output low bandpass
filter.
EXAMPLES "LAS:MODE:ILBW" -action: sets the selected channel's laser output for constant I mode (low
bandwidth).
n Front Panel
n Remote
The LASer:MODE:MDI command selects laser constant monitor diode current mode for the present channel.
SYNTAX DIAGRAM
PARAMETERS None.
POINTS OF
INTEREST On the front panel, monitor diode current mode is referred to as IPD mode.
In this mode, the control set point is entered via the LAS:MDI command.
EXAMPLES "Laser:Mode:MDi" -action: sets the selected channel's laser output mode of operation to
constant monitor diode current mode.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
:
:
LAS
PAGE 30
LASer:MODE:ILBW
:
MODE ILBW
LASer:MODE:MDI
:
MODE MDI
CHPT 4