Table of Contents
Advertisement
¨ Front Panel
n Remote
The LASer:ENABle:OUTOFF? query returns the contents of the selected channel's Laser Output Off Enable
register.
SYNTAX DIAGRAM
PARAMETERS
None. The response is the sum of the following:
1 - Laser Current Limit
2 - Laser Voltage Limit
4 - N/A
8 - Power Limit (With Output On)
16 - N/A
32 - N/A
64 - N/A
128 - N/A
POINTS OF
INTEREST
The selected channel's enabled Laser events can be set by using the LASer:ENABle:OUTOFF
command. The selected channel's Laser output status can be monitored by the LASer:EVEnt?
query.
EXAMPLES
"LAS:ENAB:OUTOFF?" -response: 1025, means that the selected channel's Current Limit
condition and a TEC Output off condition will cause the selected channel's Laser output to be
turned off.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
512 – Output Out of Tolerance
PAGE 18
LASer:ENABle:OUTOFF?
:
OUTOFF
ENAB
256 - N/A
1024 – N/A
2048 – N/A
4096 - N/A
8192 - N/A
16384 - N/A
32768 - N/A
?
CHPT 4
Advertisement
Chapters
Table of Contents
