n Front Panel
n Remote
The LASer:LDV? query returns the value of the selected channel's measured laser voltage.
SYNTAX DIAGRAM
PARAMETERS
None. The response is an <nrf value>.
POINTS OF
INTEREST
Response is the selected channel's measured laser output voltage, regardless of LAS control
mode.
This measurement is updated approximately once every 600 msec.
EXAMPLES
"LAS:ldv?" -response: 3.03, means the measured laser output voltage is 3.03 volts.
"Laser:LDV?" -response: 1.0, means the measured laser output voltage is 1.00 volts.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
PAGE 22
LASer:LDV?
LDV
?
CHPT 4