ILX Lightwave LDC-3916338 User Manual page 49

n Front Panel
n Remote
The LASer: command path is used to get to the LDC-3916338 Laser Diode Current Source commands. The
following command paths may be reached from the LASer: command path.
LASer:CAL:
LASer:ENABle:
LASer:LIMit:
LASer:MODE:
LASer:SET:
The following commands may be reached directly from the LASer: command path.
LASer:BIAS
LASer:BIAS?
LASer:CALPD
LASer:CALPD?
LASer:COND?
LASer:DEC
LASer:EVEnt?
LASer:INC
n Front Panel
n Remote
The LASer:BIAS command turns the selected channel's laser photodiode bias on or off.
SYNTAX DIAGRAM
:
PARAMETERS An <nrf value>; 1 = on, 0 = off.
POINTS OF
INTEREST When the BIAS is on, a bias of -5 volts is placed across the photodiode terminals.
EXAMPLES "LAS:BIAS ON" -action: sets the selected channel's laser photodiode bias output on.
"Las:Bias 0" -action: turns the selected channel's laser photodiode bias off.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
LASer:LDI
LASer:LDI?
LASer:LDV? LASer:OUTput
LASer:MDI
LASer:MDI?
LASer:MDP
LASer:MDP?
LASer:MODE?
:
LAS BIAS
PAGE 4
LASer:
LASer:MODulation
LASer:MODulation?
LASer:OUTput?
LASer:STEP
LASer:STEP?
LASer:TOL
LASer:TOL?
LASer:BIAS
<white
<nrf
space>
value>
CHPT 4