Table of Contents
Advertisement
n Front Panel
n Remote
The LASer:MDP? query returns the value of the selected channel's laser photodetector power measurement, in
mW.
SYNTAX DIAGRAM
PARAMETERS
None. The response is an <nrf value>.
POINTS OF
INTEREST
The response is in mW. The response is valid, even when the unit is not in constant P mode.
This measurement is updated approximately once every 600 msec.
EXAMPLES
Las:MDp?" -response: 100.0: 100 mW of photodetector power was measured on the selected
channel.
n Front Panel
n Remote
The LASer:MODE? query returns the present channel's selected laser control mode.
SYNTAX DIAGRAM
PARAMETERS
None. The response is character data (which represents the LAS operating mode).
POINTS OF
INTEREST
IHBW mode is the same as ILBW mode (low bandwidth), except that the output low bandpass
filter is disabled in IHBW mode.
EXAMPLES
"LAS:MODE?" -response: ILBW, means that constant I (low bandwidth current) mode is in
effect for the selected channel's laser output.
":Las:Mode?" -response: MDP, means that constant P (power) mode is in effect for the
selected channel's laser output.
"Las:Mode?" -response: MDI, means that constant monitor current mode is in effect for the
selected channel's laser output.
"Laser:MODE?" -response: IHBW, means that IHBW (constant current, high bandwidth) mode
is in effect for the selected channel's laser output.
COMMAND REFERENCE
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
:
:
LAS
:
:
LAS
PAGE 28
LASer:MDP?
?
MDP
LASer:MODE?
?
MODE
CHPT 4
Advertisement
Chapters
Table of Contents
