Table of Contents
Advertisement
Chapter 7 - Adept SmartVision EX Configuration
Network Settings
Network Settings opens a window for configuring network interface cards (NICs) in the selected
Adept SmartVision EX. Clicking on the Network Settings icon opens a window that displays the
available network interface cards. There are two NICs on each Adept SmartVision EX
motherboard.
To change the settings on one of the cards, click on the name of the card to select it. The lower
portion of the window will be populated with current settings for that card. Refer to the following
figure.
Figure 7-2. Network Interface Card Configuration Screen
When you are finished setting the NIC configuration, click Apply.
The Adept SmartVision EX unit will automatically reboot, to apply the changes.
56
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 7-3. NIC Configuration Reboot Message
Adept SmartVision EX User's Guide, Rev B
Advertisement
Table of Contents
