4. Click the Local Digital I/O icon.
The following pane will open:
5. From the Local Digital I/O pane, turn on the outputs needed to drive the device(s) you
connected to the card.
6. Verify that the output is working.
7. Set some inputs, for example, by activating a switch that pulls an input line high. Refer to
Figure 5-2 on page
Programmatic I/O Control
Refer to the Adept ACE User's Guide for information on using numeric variables for programmatic
control of the I/O card.
Adept SmartVision EX User's Guide, Rev B
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Starting Adept ACE and Creating an Example Workspace
Local Digital I/O icon
Figure 6-4. Local Digital I/O Icon
Figure 6-5. Local Digital I/O Pane
42.
51