Table of Contents
Advertisement
Chapter 4 - Connectors and Indicators
4.1
Keyboard and Mouse Ports
The PS/2 connectors (shown in the following figure) allow you to use a PC-compatible keyboard
and mouse with the Adept SmartVision EX. The Adept SmartVision EX accepts any IBM
AT-compatible keyboard, including 84-key standard keyboards and 101-key enhanced keyboards.
Use the green connector for the mouse and the purple connector for the keyboard.
NOTE: You can also connect a USB keyboard and mouse, using one of the USB
ports.
4.2
Serial I/O Connectors
The Adept SmartVision EX has two serial ports that you can use to communicate with external
devices at baud rates of up to 115 Kbaud.
NOTE: When you are using RS-232 communications, the length of the serial cable
should not exceed 15 meters (50 feet).
Settings and Pinouts for COM1/COM2
If you need to make a cable for communicating with COM1 or COM2, the following table shows
the pinouts and signal information for these ports.
Pin#
1
2
3
4
5
6
7
8
9
34
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 4-2. PS/2 Connectors
Table 4-3. COM1/COM2 (RS-232) Pinouts
Signal
DCD, data carrier detect
RXD, received data
TXD, transmitted data
DTR, data terminal ready
SG, signal ground
DSR, data set ready
RTS, request to send
CTS, clear to send
RI, ring indicator
Adept SmartVision EX User's Guide, Rev B
Advertisement
Table of Contents
