Table of Contents
Advertisement
4.3
Connecting a Monitor
To connect a monitor with a VGA connector or a DVI connector:
• Connect the monitor to the VGA (blue) connector on the Adept SmartVision EX
or
• Connect the monitor to the DVI (white) connector on the Adept SmartVision EX.
4.4
Connecting to a Network
To attach your Adept SmartVision EX to a SmartController, network, or broadband device,
connect an Ethernet cable between the device and one of the LAN ports on the Adept SmartVision
EX. The network cable will click into place when it is fully inserted.
Adept recommends that you use Category 5 wiring and connectors for your network. If you must
use Category 3 wiring, limit the network speed to 10 Mbps to ensure reliable operation.
NOTE: Do not plug a telephone cable into the network connector.
4.5
Connecting USB Peripherals
To attach a USB peripheral, plug the peripheral cable into one of the four USB jacks on the Adept
SmartVision EX.
4.6
Sound Connections
The connectors for sound (LOUT, LIN, and MIC), while functional, currently have no application
to Adept systems.
4.7
Expansion Slots
The Adept SmartVision EX provides two slots for PCIe cards.
Currently-supported options for these slots are:
• IEEE-1394a - two ports/card
• IEEE-1394b - three ports/card
• GigE - one port/card
• 50-pin I/O card - one port/card
Refer to
"Expansion Slot Options" on page 37
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
CAUTION:
Do not connect the Adept SmartVision EX unit
to the internet.
Adept SmartVision EX User's Guide, Rev B
Connecting a Monitor
for more details on PCIe cards.
35
Advertisement
Table of Contents
