Table of Contents
Advertisement
Chapter 7 - Adept SmartVision EX Configuration
Figure 7-1. SmartVision EX Utility Screen (after right-click)
The SmartVision EX Utility is accessed through the Windows
1. Start > Programs > Adept Technology > SmartVision EX > SmartVision EX Utility Client
The utility operates on a single Adept SmartVision EX unit. To select a specific Adept SmartVision
EX unit, run Scan, and then click on the name of the unit you want to configure.
You can right-click in the opening screen to display a list of available actions. See the preceding
figure.
Scan
Scan locates all Adept SmartVision EX units on the network, and displays the name and IP
address of each.
Selecting an Adept SmartVision EX from the Scan window will display the unit's:
• Installed Adept ACE version
• Current session Write Filter status (Locked/Unlocked)
54
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Adept SmartVision EX User's Guide, Rev B
®
Start button:
Advertisement
Table of Contents
