Pcie Card Check; Starting Adept Ace And Creating An Example Workspace - adept technology SmartVision EX User Manual

This chapter gives procedures for verifying that all of the ports in PCIe expansion cards are
functioning correctly.
To perform these procedures, you will need:
• A functional Adept SmartVision EX unit
• A monitor, connected to the Adept SmartVision EX unit
• A mouse, connected to the Adept SmartVision EX unit
• For checking camera port cards:
• A camera compatible with each type of PCIe camera port you want to check
• Cables for the cameras to be checked
For a GigE camera, this requires both Ethernet and a Hirose 12-pin cable. You will
have to supply power to the camera through the Hirose cable.
• A keyboard, connected to the Adept SmartVision EX unit (optional)
To test the PCIe cards, you will:
• Start Adept ACE
• Open an Example Workspace
• For camera support PCIe cards
• Add the appropriate cameras to the workspace
• Verify that each port of each PCIe card is functional
• For I/O cards
• Verify that inputs and outputs are recognized by Adept ACE software
6.1

Starting Adept ACE and Creating an Example Workspace

1. Turn on the Adept SmartVision EX unit and wait for it to finish booting.
2. Double-click the Adept ACE icon on the desktop.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

PCIe Card Check

Adept SmartVision EX User's Guide, Rev B
6
47