Table of Contents
Advertisement
The configuration of a Adept SmartVision EX unit can be managed remotely, from an attached PC
running the SmartVision EX Utility, or locally, from the unit itself, using Windows.
The SmartVision EX Utility is supported on:
• Windows Vista
• Windows XP
• Windows Server 2003
• Windows Longhorn
• Windows 2000
The SmartVision EX Utility will NOT run on:
• Windows NT 4.0
• Windows Me
• Windows 98 Second Edition
• Windows 98
• Windows 95
7.1
Remote Configuration (the SmartVision EX Utility)
The SmartVision EX Utility allows you to configure Adept SmartVision EX units from a remote
PC. The Utility, which is distributed as a part of Adept ACE, can be used to:
• Locate all Adept SmartVision EX units on your network
• Select one Adept SmartVision EX unit to configure
• Assign a display name to the selected unit
• Configure Adept SmartVision EX network interface cards on the selected unit
• Copy event logs from the selected unit to the remote PC
• Lock or unlock the write filter for the selected unit (protects C: drive)
• Reboot the selected unit
• Install/upgrade the Adept ACE software on the selected unit
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Adept SmartVision EX
Configuration
Adept SmartVision EX User's Guide, Rev B
7
53
Advertisement
Table of Contents
