System Configuration - Mitsubishi Electric ER-1V680D1 User Manual

1.2

System Configuration

This section describes the system configuration of the RFID interface module.
Ex.
System that uses a separate amplifier type antenna
24VDC
Ex.
System that uses a built-in amplifier type antenna (ER-1V680D1 only)
24VDC
• The RFID interface module is mountable on an extension base unit and an intelligent device station of CC-Link IE Field
Network (remote head module) as well as a main base unit.
• The built-in amplifier type antenna is available for the ER-1V680D1. (The antenna is not available for the ER-1V680D2.)
• The RFID interface module requires the 24VDC power supply.
• Use antennas, amplifiers, and RF tags in an available combination. For details, refer to the catalogs for Omron RFID
system V680 series products.
1 OVERVIEW
16
1.2 System Configuration
Amplifier
Antenna
(built-in amplifier type)
Antenna
RF tag
RF tag