Multi-Repeat - Mitsubishi Electric ER-1V680D1 User Manual

Multi-repeat

This command is used to automatically detect RF tags coming into the antenna communication area and communicate with
the tags. Communicates with RF tags coming into the communication area one after another until ID command execution
request (Y4, Y1C) is turned off. After communicating, the RF tag is prohibited to move.
When using this command, set 0006H to Communication specification area (Un\G1, Un\G4001).
RF tag C
RF tag B RF tag B
• When ID command execution request (Y14, Y1C) is turned on, ID-BUSY (X3, XB) turns on and the module starts to detect
the next RF tag entering the antenna communication area. The module starts to communicate with an RF tag coming into
the antenna communication area.
• After communication with the RF tag, the RF tag is prohibited to move and ID command complete (X4, XC) turns on. The
module starts to detect the next available RF tag in the antenna communication area.
• When Result reception (Y16, Y1E) is turned on, ID command complete (X4, XC) turns off.
• When ID command execution request (Y14, Y1C) is turned off, ID-BUSY (X3, XB) turns off and the module ends to detect
the RF tag.
• When the RF tag prohibited to move moves outside the communication area or ID command execution request (X14, Y1C)
is turned off, the moving prohibition of RF tag is cleared.
• This function cannot be used to communicate with V680-D1KP.
6 FUNCTIONS
76
6.3 Communication Specification
RF tag A
Communication
area