Copy - Mitsubishi Electric ER-1V680D1 User Manual

Copy

This command is used to copy data of an RF tag between the channel 1 and channel 2.
Setting data
Buffer memory
Command code specification area (Un\G0, Un\G4000)
Communication specification area (Un\G1, Un\G4001)
Processing specification area (Un\G2, Un\G4002)
Head address specification area (Un\G3, Un\G4003)
No. of processing points specification area (Un\G4, Un\G4004)
Command option specification area (Un\G5, Un\G4005)
RF tag UID storage area (Un\G90 to Un\G93, Un\G4090 to Un\G4093)
Data storage area (Un\G100 to Un\G1123, Un\G4100 to Un\G5123)
Processing details
When executed with ID command execution request (Y14) of antenna 1, the Copy command reads the data of the RF tag of
antenna 1 (copy source) and writes the data to the RF tag of antenna 2 (copy destination).
When executed with ID command execution request (Y1C) of antenna 2, the Copy command reads the data of the RF tag of
antenna 2 (copy source) and writes the data to the RF tag of antenna 1 (copy destination).
When the Copy command is completed successfully, ID command complete (X4, XC) of the copy source turns on.
■Copy source antenna
This command reads the RF tag data of the number of bytes specified in No. of processing points specification area (Un\G4,
Un\G4004) starting from the address specified in Head address specification area (Un\G3, Un\G4003).
Trigger or Auto can be set to Communication specification area (Un\G1, Un\G4001).
■Copy destination antenna
This command writes the data of the number of bytes specified in No. of processing points specification area (Un\G4,
Un\G4004) starting from the address specified in Command option specification area (Un\G5, Un\G4005) to an RF tag.
Only Trigger can be set to Communication specification area (Un\G1, Un\G4001).
6 FUNCTIONS
56
6.2 Command
Range/Data to be stored
0009H
0000H: Trigger
0001H: Auto

Copy source address (Read)
0000H to FFFFH
0001H to 0800H
Copy destination address (Write)
0000H to FFFFH

