Keypad Fault Indication - GE Fuji Electric AF-300ES Instructions Manual

Keypad fault indication

LCD Graphic Display at Power Up
STOP
PRG DATA SET
>> LED SEL
PressFUNC/DATA key to
display Program Mode.
DATA CHECK
I/O CHECK
TRIP IND CK
TRIP FACTOR
Press DOWN key to move
cursor to TRIP IND CK.
DATA CHECK
I/O CHECK
TRIP IND CK
TRIP FACTOR
Press FUNC/DATA key
The following displays would only be accessible after a fault and
before main power is removed.
O C 3
LCD graphic display of the trip status.
Fout = .
Fref = .
Iout = .
Vout =
Press >> key to display
circumstances of trip.
TIME =
TRQ =
TEMP =
Press >> key to display
input terminal status.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Press DOWN key to move
cursor to TRIP FACTOR.
DATA CHECK
I/O CHECK
TRIP IND CK
TRIP FACTOR
Press FUNC/DATA key
Hz
Hz
A
V
Press >> key to display any
h
%
°C
(*See next page for
Conditions at Fault)
O C 3
LCD graphic display
of the trip factors.
SHOCK LOAD
EXCESS LOAD
TRQ BOOST
SHORT CIRCT
additional trip factors.
GROUND FAULT
Press RESET key
to return to Operation Mode.
5-5
THR
FWD X3
X4
REV RST
HLD X5
X1
X2
BX
: ON
: OFF
Press >> key to display output
terminal status.
Y1 Y5
Y2
Y3
Y4
Press >> key to display
current and last 3 faults.
0 = LV
-1 = 0H2
-2 = 0C1
-3 = LV
Press >> key to return
to trip status display.
Press RESET key to
return to Operation Mode.
STOP
PRG DATA SET
>> LED SEL