GE Fuji Electric AF-300ES Instructions Manual page 85

LCD
GRAPHIC
FUNCTION DISPLAY
65
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SETTING DESCRIPTION
Pattern Operation (cont'd)
NOTES : – When Function Code 65 is set
to 1, 2 or 3, pattern operation is made
possible by setting the multi-step
frequency combination of stages 1 through 7
(Function Codes 66 through 72).
– When in the pattern operation,
frequency changeover via the X1, X2 and X3
terminals is not required.
– Pattern operation switches to set
frequencies 1 through 7 in ascending numerical
order only.
Stage 2
Stage 1
Time
Time
Stage1 Stage2
– To set motor's direction of
rotation and acceleration/deceleration time,
utilize Function Codes 66 through 72.
– If each subsequent frequency is
higher or lower than the present frequency, the
acceleration or deceleration time will be auto-
matically selected based on the Stage setting
(Function Codes 66 through 72).
6-27
Stage 4
Stage 5
Stage 3
Time
Time Time
Stage 3 Stage 4 Stage5 Stage6
FACTORY
SETTING
Stage 6
Stage 7
Time Time
Stage7