Main Circuit Wiring for CE Mark
Connect the power supply of overvoltage category 2 to the main power input terminals L1, L2 and L3 via a
circuit breaker and/or a leakage current breaker. There is no need to match the phase when connecting.
If the power supply is overvoltage category 3, place the devices to limit overvoltage below 2.5 kV as shown.
Figure 4-13. MAIN CIRCUIT WIRING FOR CE MARK
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Isolation Transformer
Varistor
Surge Absorber
4-14
LI
L2
L3
Inverter
LI
L2
L3
Inverter