GE Fuji Electric AF-300ES Instructions Manual page 79

LCD
GRAPHIC
FUNCTION DISPLAY
* 50 FDT HYSTR
* 51 OL WARNING
* 52 53-59
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SETTING DESCRIPTION
FREQUENCY DETECTION HYSTERESIS
The setting is the offset that FDT will
have from the FDT level. Adjustable from
0.0 to 30 Hz.
Output
Frequency
Hz
0
FDT
Signal
OVERLOAD EARLY WARNING
This open collector output is active when
the output current exceeds the OL setting.
This output can be used in conjunction with
a relay unit to allow connection to system
control circuitry. Adjustable from approx-
imately 20 to 135% of drive rated current.
NOTE: This is a timed function similar to
Function Code 08 and 09 (ELCTRN OL).
FUNCTION CODE BLOCK DISPLAY
This setting determines whether or not
Function Codes 53 through 59 will be displayed
and available for adjustment.
0: Function Codes 53 through 59 NOT displayed.
1: Function Codes 53 through 59 displayed.
6-21
FACTORY
SETTING
FDT Hyster
1.0
FDT Level
t
RATED
CURRENT
0