SeaDoo 3D Manual page 310

1. Wiring harness routing
1. Throttle cable routing
Secure throttle cable to steering support with
clamp no. 49.
smr2005-066
Handlebar and Adjuster
When installing blocks no. 20 on handlebar, en-
sure to position block pin into handlebar hole.
NOTE: Block must be centered on handlebar. If
not, it is in reverse position.
Torque screws no. 19 as per the following se-
quence.
www.SeaDooManuals.net
Section 10 STEERING SYSTEM
Subsection 01 (STEERING SYSTEM)
299