SeaDoo 3D Manual page 242

1. Fitting
Unscrew the tapered needle no. 6.
NOTE: Hold the valve to prevent it from turning.
1
F01E1TA
1. Tapered needle
Remove the tapered needle from valve housing.
smr2005-061
Subsection 01 (COMPONENTS AND CIRCUIT)
F01E20A
1. Remove tapered needle
Pull the valve slightly. Using pliers, release the
clamp which retains the bellows no. 8.
Remove valve no. 7 and bellows no. 8.
Loosen clamp to separate valve from bellows.
1. Clamp
www.SeaDooManuals.net
Section 08 COOLING SYSTEM
1
231