SeaDoo 3D Manual page 133

Section 06 ENGINE MANAGEMENT (RFI)
Subsection 02 (DIAGNOSTIC PROCEDURES)
POSSIBLE CAUSES
Sensor has been replaced
and TPS closed position
not reset.
Throttle body has been
replaced and TPS closed
position not reset.
ECM has been replaced
and TPS closed position
not reset.
Throttle cable too tight.
Sensor is loose.
Throttle bracket is loose.
Adjustment screw worn
or loose.
Burnt Fuse and Related Fault Code
FUSE FUSE CAPACITY AND
NO FUNCTION
5 A
Main
Accessories
10 A
1
Fuel pump
5 A
2
RAVE solenoid
10 A
3 Ignition coil and starter
solenoid
3 A
4
Injector 1 (MAG)
3 A
5
Injector 2 (PTO)
6 N
NOTE: Fuses are located on the vehicle control
module (VCM). Refer to OVERVIEW for more de-
tails.
118
ACTION
• Reset Closed
Throttle.
• Reset Closed
Throttle.
• Reset Closed
Throttle.
• Fix and reset Closed
Throttle.
• Fix and reset Closed
Throttle.
• Fix and reset Closed
Throttle.
• Change throttle
body.
CODE
None
None
P-0231
P-0079
P-0616, P0351,
P-0352
P-261, P-262
P-264, P-265
www.SeaDooManuals.net
smr2005-055