SeaDoo 3D Manual page 200

Section 07 ELECTRICAL SYSTEM
Subsection 03 (STARTING SYSTEM)
SWITCH CONNECTOR
WIRE
WHITE/GRAY switch terminal
smr2005-057-007_b
SWITCH CONNECTOR
WIRE
BLACK switch ring
smr2005-057-007_c
Safety Lanyard on Switch
Connect test probes to switch as per table and
measure resistance.
SWITCH CONNECTOR
WIRE
BLACK/
BLACK
YELLOW
smr2005-057-010_a
If any resistance test fails, replace DESS switch.
Solenoid
717 Engine
The Solenoid is located inside the rear electrical
box.
188
RESISTANCE
@ 20°C (68°F)
close to 0
smr2005-059-002_a
1. Solenoid
RESISTANCE
@ 20°C (68°F)
787 RFI Engine
Solenoid is located above ECM/VCM.
close to 0
RESISTANCE
@ 20°C (68°F)
close to 0
smr2005-058-002_b
1. Solenoid
Inspect connections and clean as necessary.
All Engines
Static Test: Continuity
With a multimeter, check primary winding resis-
tance as follows.
www.SeaDooManuals.net
smr2005-059