Table of Contents
Advertisement
Chapter 3 SMART2 Operation
The rest of the setup is position type and log dependent according to the application. . Also refer to the NovAtel
application note
APN-038: Pseudorange/Delta-Phase (PDP) and GLIDE Filters
novatel.com/support/support-materials/application-notes.
3.4 Enabling SBAS Positioning
SMART2 receivers are capable of SBAS positioning. This positioning mode is enabled using the
SBASCONTROL command:
sbascontrol enable auto
When the command is entered, the SMART2 automatically tracks the SBAS that is operating in the region (e.g.,
WAAS or EGNOS) and applies the corrections from the service. On a simulator, leave the test mode parameter
off or specify NONE explicitly. For more on SBAS, refer to application note
ation
(additional Application Notes available at novatel.com/support/support-materials/application-notes) and the
known solution
SBAS
3.5 Enabling PPP
L-Band equipped receivers can achieve sub-meter position accuracy using correction data received from geo-
stationary satellites. To use the L-Band corrections, an L-Band-capable receiver model is required (refer to our
web site
novatel.com/products/antennas
For information on getting started with TerraStar Correction Services, refer to:
TerraStar Correction Services Quick Start Guide
l
For more information on L-Band positioning, refer to:
NovAtel Application Notes: APN-061: NovAtel CORRECT with PPP using TerraStar Corrections available
l
from
novatel.com/support/support-materials/application-notes
the
Agriculture Commands and Logs Reference Manual
l
and/or
visit
novatel.com/support
l
visit
novatel.com/products/correction-services
l
3.5.1 TerraStar Subscriptions
A subscription is required to use TerraStar service for land, airborne and near shore applications. Near shore
applications are defined as vessels operating within 10 km of shore. For more information about TerraStar ser-
vices, visit novatel.com/products/correction-services/terrastar-correction-services. To obtain a subscription,
contact your local NovAtel sales representative. The NovAtel product serial number (PSN) is needed to obtain a
subscription. To obtain the receiver serial number, enter the following command:
log version once
<VERSION COM1 0 83.0 FINESTEERING 2061 167959.862 1a04c000 3681 15699
< 8
< GPSCARD "DSNLNNTMNT0G" "BMWR19050037L" "OEM2500-1.00" "OA7CR0602RN0000"
"OM7BR0100RBG000" "2019/Jun/28" "09:09:16"
< EMBEDDED_AUTH "GSNNNNNNN" "?MWR?????????" "NO_HW_VER" "NO_EXPIRY_DATE"
"" "2019/Jun/28" "09:09:35"
< APPLICATION "" "" "" "ES2AR0602RN0000" "" "2019/Jun/28" "09:09:43"
< DEFAULT_CONFIG "" "" "" "ES2CR0602RN0000" "" "2019/Jun/28" "09:09:58"
< PACKAGE "" "" "" "ES2PR0602RN0000" "" "2019/Jun/28" "09:09:49"
< ENCLOSURE "SMART2-TB" "NMVK19060013V" "" "" "" "" ""
SMART2 Installation and Operation Manual v4
Positioning.
for information on NovAtel L-Band-capable antennas).
available from our web site at
APN-051 Positioning Modes of Oper-
for log/command details
27
Advertisement
Table of Contents
