Novatel SMART2 Installation And Operation User Manual page 7

SMART2 Notices
The SMART2 has been authorized for use in Mobile applications. At least 20 cm (8 inches) of
separation between the SMART2 and the User must be maintained at all times.
Le SMART2 a été autorisé pour une utilisation dans les applications mobiles. Au moins 20 cm
(8 pouces) de séparation entre le SMART2 et l'utilisateur doit être maintenue à tous fois.
Bluetooth
SMART2-B and SMART2-TB contain a Bluetooth radio with the following approvals:
IC: 5123A-BGTBT121
l
European Union (EU) SMART2-B and SMART2-TB Bluetooth
NovAtel Inc. declares that the SMART2-B and SMART2-TB Bluetooth transceivers are in compliance with Dir-
ective 2014/53/EU (Radio Equipment).
The full text of the EU Declaration of Conformity may be obtained from the NovAtel web site at:
novatel.com/products/novatel-compliance/eu-declaration-of-conformity
Radio Information
Description of Service: Bluetooth - BR/EDR/BLE
Operational Frequency: 2400 MHz to 2480 MHz
Modulation: GFSK/4-DQPSK/8-DPSK
Rated Power: 13.0 dBm e.i.r.p
RoHS
The SMART2 is in conformity with Directive 2011/65/EU of the European Parliament and of the council of 8 June
2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.
WEEE Notice
If you purchased your SMART2 product in Europe, please return it to your dealer or supplier at the end of its life.
The objectives of the European Community's environment policy are, in particular, to preserve, protect and
improve the quality of the environment, protect human health and utilise natural resources prudently and ration-
ally. Sustainable development advocates the reduction of wasteful consumption of natural resources and the pre-
vention of pollution. Waste electrical and electronic equipment (WEEE) is a regulated area. Where the
generation of waste cannot be avoided, it should be reused or recovered for its material or energy. WEEE
products may be recognized by their wheeled bin label (
See novatel.com/products/novatel-compliance/novatel-environmental-compliance
E-Mark
The SMART2 has been granted EC type approval of an electric/electronic subassembly with respect to elec-
tromagnetic compatibility ECE Regulation 10.05. Therefore the equipment is labeled with the following approval
marks.
SMART2 Installation and Operation Manual v4
).
for more information.
7