Novatel SMART2 Installation And Operation User Manual page 31

Chapter 3 SMART2 Operation
The SMART Antenna must be mounted with the connector facing the rear of the vehicle, as shown in Figure 9:
SMART Antenna Orientation below.
The SMART Antenna must be rigidly secured to the vehicle to minimize errors due to vibration and
motion.
Set the SMART Antenna Height and Enable Terrain Compensation
The height measurement should be made while the vehicle has the correct tire pressure and is parked on a hard-
packed and level surface. The measurement should be made, in meters, from the ground to the bottom of the
SMART Antenna. The measurement accuracy should be within 2.5 to 5.0 cm.
SMART2 Installation and Operation Manual v4
Figure 8: SMART Antenna Installation
Figure 9: SMART Antenna Orientation
31