Table of Contents
Advertisement
Chapter 1 SMART2 Overview
The SMART2 is a high performance GNSS receiver and antenna, capable of receiving and tracking different com-
binations of GNSS code and carrier signals on a maximum of 167 channels. SBAS (Satellite Based Aug-
mentation Systems) support, which includes WAAS (North America), EGNOS (Europe) and MSAS (Japan) is
standard. Refer to An Introduction to GNSS available on our website at
an overview of each of the above signal types. The SMART2 rear panel also features a Light Emitting Diode
(LED) for status indication.
Once properly powered, the SMART2 begins operating as a fully functional GNSS system.
1.1 Features and Models
The main features of the SMART2 include:
a high performance, dual-frequency GNSS receiver
l
a high performance GNSS dual-frequency antenna
l
a CAN port
l
three RS-232 COM ports
l
Bluetooth wireless technology (optional)
l
one LED status indicator
l
a PPS output
l
a Mark Input (MKI) (Event1)
l
a water and dust tight enclosure
l
Emulated Radar output
l
Terrain Compensation (optional)
l
support for TerraStar-L and TerraStar-C PRO correction services
l
The SMART2 is available in several different firmware models whose configurations may include other additional
features (see Table 1: Hardware Options below).
Contact NovAtel Sales at
upgrading a model to increase feature/functionality or go to novatel.com/products/smart-antennas/smart2. Refer
to the chapter Firmware Updates and Model Upgrades on page 51 for details.
1.2 SMART2 Connector Overview
All SMART2 models use the same connector for power and communication. Refer to Table 2: SMART2 Con-
nector Pin-out on the next page for pin outs.
SMART2 Installation and Operation Manual v4
Table 1: Hardware Options
Tradename
SMART2
SMART2
SMART2-B
SMART2 with Bluetooth
SMART2-TB
SMART2 with Bluetooth and Terrain Compensation
novatel.com/contactus/sales-offices
novatel.com/an-introduction-to-gnss
Description
for information regarding available models,
for
13
Advertisement
Table of Contents
